Rob Watson, Vessel Scanning, Ship Scanning, BoatBuilder, Yacht Designer, Custom Yacht Design, PassageMaker, Passage Maker, Custom Yacht Design, Custom Design, Boats, Marine Designer, AutoCAD, Drafting, Lofting, Deck Plans, Part Drawings, Mechanical Animations, Processes, Safety and Training.© 2011 - C.R. Watson, Watson Enterprises

The first step was to produce a sample of the RV that might be transported on the RVB. We need a 1:1 model of the largest typical RV by actually measuring several 5th wheel trailers. There are larger RV's, but these 5th wheelers are more typical of those to frequently travel to lakes for a week long vacation.
Then, the barge was developed around the RV with an offering of automatic ballast leveling, on-board 10kw generator, a shore based loading system (not shown), powered by two outboards, all to be manufactured, disassembled, and shipped overland to inland marinas for re-assembly. The key element of this design was the loading system and the method of off-loading and assembly. Those basics were not in the patent so we've chosen not to show them here.

© 1997-2016 c.r. watson - all rights reserved
The use of any trademarks, trademarked names, and/or copyrighted information is stated as a fact of record and is not
intended to imply endorsement of any kind. The use of any pictures, writings, or materials from this site without
express written consent of Charles R. Watson dba Watson Enterprises aka is forbidden.